Philips 150T4FS User Manual page 50

Troubleshooting
Green, red, blue, dark and white dots
remain.
TV and Audio Problems
Poor TV signal reception
No TV picture
No sound
For further assistance, refer to the
distributor.
file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/safety/saf_troub.htm (3 of 4) [3/2/2004 3:44:10 PM]
Consumer Information Centres
RETURN TO TOP OF THE PAGE
The remaining dots are normal characteristic
of the liquid crystal used in today's
technology.
The proximity of mountains or high buildings
may be responsible for ghost pictures,
echoing or shadows. In this case, try
manually adjusting your pictures: see 'fine
tuning' or adjust the direction of the outside
aerial.
For Asia users in non-NTSC area: Does your
antenna enable you to receive broadcasts in
this frequency range (UHF or VHF band)? In
the event of difficult reception (snowy
pictures) switch the NR on the PICTURE
menu to ON.
Have you connected the aerial socket
properly? Have you chosen the right system?
Poorly connected aerial sockets are often the
cause of picture or sound problems
(sometimes the connectors can become half
disconnected if the Monitor set is moved or
turned). Check all connections.
Ensure that the audio cables are firmly
connected to both the audio input connectors
on your Monitor and audio output connectors
on your PC or Video player.
If on certain TV channels you receive a
picture but no sound, this means that you do
not have the correct TV system. Modify the
SYSTEM setting.
list and contact your local Philips