Philips 150T4FS User Manual page 41

FAQs (Frequently Asked Questions)
ROM) included in this package. Monitor drivers (.inf and .icm files) will be installed automatically.
Q:
How do I adjust the resolution?
A:
Your video card/graphic driver and monitor together determine the available resolutions. You
can select the desired resolution under Windows® 95/98 Me & 2000/XP with the 'Display
properties/Settings' control panel.
Q:
What if I get lost when I am making monitor adjustments?
A:
Simply press the OSD button, then select 'Reset' to recall all of the original factory settings.
Q:
My Monitor has no power (Power LED does not light up). What should I do?
A:
Make sure the power cord is connected to the Monitor.
Q:
Will the product accept an Interlace signal?
A:
No. If an Interlace signal is used, the screen displays both odd and even horizontal scanning
lines at the same time, thus distorting the picture.
Q:
What does the Refresh Rate mean for LCD?
A:
Unlike CRT display technology, in which the speed of the electron beam is swept from the top to
the bottom of the screen determines flicker, an active matrix display uses an active element (TFT) to
control each individual pixel and the refresh rate is therefore not really applicable to LCD
technology.
Q:
Will the LCD screen be resistant to scratches?
file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/safety/saf_faq.htm (2 of 8) [3/2/2004 3:44:09 PM]