Philips 150T4FS User Manual page 105

Using other menus (NA)
4. Press
5. Use , to highlight EXIT and then press
Automatic tuning
This menu allows you to automatically search for all the programmes available in your region
(or on your cable network).
1. Press
2. Use , to scroll the highlight INSTALL, and then press
3. Use , to scroll the highlight TUNER MODE, and then press
4. Press , keys to select your tuner:
Antenna: your TV is connected to an antenna to receive air programmes
Cable: your TV is connected to a cable network
5. Press
6. Use , to scroll the highlight AUTO STORE.
7. Press
menu reappears automatically.
8. The programmes found will be stored into memory list. Use the SKIP menu to enable
or disable the programmes which you want it to be skipped. When you use P
UP/DOWN to access programme, all disable programmes will be skipped.
Manual tuning (Fine tune)
This menu allows you to store the programmes one by one by hand.
1. Press
2. Use , to scroll the highlight INSTALL, and then press
3. Use , to scroll the highlight FINE TUNE, and then press
4. Press or
file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/tv_na.htm (4 of 5) [3/2/2004 3:44:35 PM]
to select the mode.
RETURN TO TOP OF THE PAGE
to activate the menu.
to return the install menu.
to activate the automatic searching. After several minutes, the INSTALL
RETURN TO TOP OF THE PAGE
to activate the menu.
key until get good picture.
to exit from the menu.
.
.
.
.