Philips 150T4FS User Manual page 100

Using other menus (AP)
5. Use , to highlight EXIT and then press
Automatic tuning
This menu allows you to automatically search for all the programmes available in your region
(or on your cable network).
1. Press
2. Use , to scroll the highlight INSTALL, and then press
3. Use , to scroll the highlight AUTO STORE, and then press
automatic searching. After several minutes, the INSTALL menu reappears
automatically.
4. The programmes found will be numbered in ascending order starting at 0, 1, 2, etc.
Use the SKIP menu to enable or disable the programmes which you want it to be
skipped. When you use P UP/DOWN to access programme, all disable programmes
will be skipped.
Manual tuning
This menu allows you to store the programmes one by one by hand.
1. Press
2. Use , to scroll the highlight INSTALL, and then press
3. Use , to scroll the highlight MANUAL STORE, and then press
4. Use , to scroll the highlight SEARCH and press
As soon as a programme is found, the search will stop. If you know the frequency of
the programme required, enter its number directly using the 0, 9 keys and go to step
6.
5. If reception is unsatisfactory, select FINE TUNE and hold down
6. Select PROG. NO (programme number) and use the
number.
7. Select STORE and press
stored.
file:///D|/My%20documents/dfu/B2C_TV/ENGLISH/150T4/osd/tv_ap.htm (4 of 5) [3/2/2004 3:44:35 PM]
RETURN TO TOP OF THE PAGE
to activate the menu.
RETURN TO TOP OF THE PAGE
to activate the menu.
to exit from the menu.
. The message STORED appears. The programme is
.
to activate the
.
.
.The search begins.
or key.
or to change the desired