Table of Contents
Advertisement
Incorrect installation can result in damage to property and injury to persons and animals; the manufacturer is
not liable for the consequences.
This product is heavy, handle with care and install the product in a frost-free room.
Ensure that the floor can support the weight of the water filled appliance.
The destruction of the appliance by overpressure due to the blocking of the safety device inactivates the warranty.
1.3 INSTALLATION WARNINGS
When installing this product in a bathroom do not use the "Prohibited space" and respect, at least, the "Protected
space"
listed
as
shown
below:
Prohibited space
Protected space
This product must be placed in an accessible location.
The water heater must be fixed to the ground using the fixing brackets provided for this purpose and adhesives
are not considered to be a reliable fixing means.
This product is designed to be used at a maximum altitude of 2000 m.
Refer to description and illustrations in paragraphs "7.1 Preparation of place of installation" on page 14, "7.2
Securing to the floor" on page 15 and "7.4 Securing and connections of this appliance" on page 17.
1.4 AERAULIC CONNECTIONS WARNINGS
The simultaneous operation of an open-chamber hearth (e.g. open fireplace) and the heat pump
causes a dangerous negative pressure in the room. The negative pressure can cause the return of
exhaust gases into the room. Do not operate the heat pump together with an open-chamber hearth.
Only
use
sealed-chamber
hearths
(approved)
with
separate
combustion
air
supply.
Seal the doors of boiler rooms that do not have the inflow of combustion air in common with living areas.
A suitable protection grille must be installed both at the air intake and outtake connections to prevent any foreign
bodies from going inside the equipment.
Refer to description and illustrations in the "7.4 Securing and connections of this appliance" on page 17.
Page 4
User, Installations and Maintenance Manual
Advertisement
Table of Contents
Troubleshooting
