Table of Contents
Advertisement
8.3 Charging Operation
Connect the charger to EV
a.
Plug the charger gun into the EV Charging Port.
b.
After plug-in, please check the charger gun is connected securely.
c.
When the charger gun & EV connection is secured, the LED indicator will start flashing
yellow, meaning the charger is ready to initiate a charging session.
Start Charging & Stop Charging.
The charging session can be initiated and stopped by the following options.
a.
By RFID card: Use the registered RFID card to start & stop the session.
b.
Plug & Play mode: In a situation with no internet connection access, the charger can be set
into plug & play mode, meaning after plugging in the connector, the charging session will
be initiated and after plugging out the connector, the charging session will be stopped,
please contact Duracell Energy Ltd to enable this function.
c.
By App: The charger can be monitored and controlled by either PureCharger App or
Duracell Energy App. Please refer to the user manual.
Page 29 of 33
Advertisement
Table of Contents
