Helmet Holder - Yamaha Star XV19CTSZ 2009 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Helmet holder

1
4
1. Helmet holder
2. Helmet holding cable
The helmet holder is located under the
rider seat. A helmet holding cable is
provided beside the owner's tool kit to
secure a helmet to the helmet holder.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See page
4-14.)
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loop over the helmet holder.
EAU38342
2
1. Helmet holding cable
2. Helmet
3. Place the helmet on the left side of
the vehicle, and then install the rid-
er seat. WARNING! Never ride
with a helmet attached to the
helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an acci-
dent.
place the helmet on the left side
of the vehicle. Some helmets
may contact the muffler when
placed on the right side be-
cause of their size or shape.
[ECA15331]
NOTICE: Be sure to
[EWA10161]
4-16
To release the helmet from the hel-
met holder
Remove the rider seat, remove the hel-
met holding cable from the helmet hold-
er and the helmet, and then install the
seat.