Epson SC-F2200 Series Printing Manual page 8

DTF Film Printing Guide
D
Move the platen gap lever to the left to set the
scale to P.
E
Tighten the fixing lever, and then secure the
platen gap lever.
Printing on Film
F
Place the film on the platen while checking the
preview display area in Garment Creator 2.
A: Printing area of the platen selected when
creating the job
B: Image of the DTF film used for printing
Note:
❏ The top of the preview display area is the
front of the printer (the part with the hanger
when using a hanger platen).
❏ You can print within the entire A frame.
Adjust the placement position while checking
the layout result to avoid printing beyond the
edges of the film.
❏ Although you can zoom B in or out, the
aspect ratio cannot be changed to match the
actual film.
G
Secure the film with opaque tape to keep it in
place.
8