Record; Exit Recording Mode - TrekStor vibez 12GB User Manual

Append
Select "a " to add a track at the end of the current playlist.
ppeNd
Enqueue
Select "e " to add a track to the current playlist. The selected track is added after the track currently being
NQueue
played.
Reorder
Select "r " to change the position of the selected track in the current playlist, meaning relocating the track
eorder
forward or backward.
Remove
Select "r " to remove a track from the current playlist. You can choose whether you would like to remove a certain
eMoVe
track, all tracks of the artist performing the current track, all tracks of the artist's album, all tracks of a genre, all tracks
of a year, all tracks below or above the selected track in the playlist or the entire tracks of the current playlist from
the playlist.
Make Playlist
If you select "M p
ake laylist

13.3) Record

You have the option to choose 2 different recording sources with the vibez. You can make voice recordings using the
integrated microphone. You can connect an external device (e.g. CD player) to the line-in jack (headphone jack) using
the enclosed line-in cable, and directly record music from it.
To start recording:
• Press the  button to activate the main menu.
• Select the menu item "r
Note: Always confirm your selection by pressing the  button.
• In the following menu you can select "V
• Start recording by pressing the  button.
Note: You can adjust the recording dynamics for voice recordings by moving the scroll wheel (from -11 dB to +11 dB).
• A repeated pressing of the  button will set the record function on hold.
• By briefly pressing the  button, you can stop the current recording and begin a new recording at the same
time (i. e. a new file is created).
• To stop a recording activate the main menu by pressing the  button and select the menu item "r
To stop recording now, select "s
• To stop the current recording and immediately start a new recording, select "s
• To change the recording source (voice or line-in), select "C
recording source is changed.

Exit recording mode

Exit recording mode and change back to Player mode as follows:
• Press the  button to activate the main menu.
• Select the menu item "r
• The playback function is now continued where it was last interrupted.
" you have the option to save the current playlist under any name.
".
eCord
" for voice recordings and "l
oiCe
".
top
p ".
esuMe lay
" for line-in recordings.
iNe iN
".
plit
". The current recording is stopped when the
HaNge sourCe
– 55 –
EN
".
eCorder