Ftp Server; Examples - Buffalo AirStation NFINITI HighPower WZR-600DHP User Manual

Wireless -> Basic Settings
• Configure Wireless Mode to Client Bridge.
• Set Wireless Network Mode to match the access point you want to
connect to.
• Enter the network name (SSID) of the AP you want to connect to.
• Click Save.
Wireless -> Wireless Security
• Configure security to match the security settings of the access
point you want to connect to.
• Click Apply Settings.
After the router reboots, confirm that it has connected to the access
point. If there is a DHCP server available on the access point side, a
PC in the router's LAN configured to request an address from DHCP
should receive an IP address.

3.4. FTP Server

The router can be used as an FTP server when a USB disk (such as a
hard disk or flash memory device) is connected to the USB port on the
rear of the router.
3.4.1.

Examples

Services -> USB
･Make the settings in the USB Support section, then click Apply
Settings.
Examples:
Core USB Support
USB Printer
Support
USB Storage
Support
Automatic Drive
Mount
Run-on-mount
Script Name
Disk Mount Point
- 23 -
Enabled
Disabled
Enabled
Enabled
blank
/mnt