Troubleshooting and Maintenance
Checking the Operation of the Lightwave Component Analyzer
94
1 Shut down the network analyzer, as described in the
network analyzer user guide and online help.
2 Power down both the network analyzer and the optical
test set.
3 Start the equipment and perform an electrical calibration
of the network analyzer, as described in "Starting the
Lightwave Component Analyzer on the ENA" on page 42
or "Starting the Lightwave Component Analyzer on the
PNA" on page 56.
4 Perform the performance verification, as described in
"Performance Verification on the ENA" on page 23 or
"Performance Verification on the PNA" on page 26.
Agilent N4373A Lightwave Component Analyzer, First Edition