User Eq Customization; Screen Saver - Transcend Tsonic 630 2GB User Manual

User EQ Customization

The User EQ allows you to customize the settings of a 5 Band Equalizer to your personal preferences.
1. In the EQUALIZER Mode, press the "Next-Fast Forward" button
button to select the Set User EQ icon
button to enter the Set USER EQ Mode.
2. Press the "Next-Fast Forward" button
between the 5 customizable equalizer Bands: 80Hz - 250Hz - 1KHz - 4KHz - 12KHz. Press the
"Volume Up" button
settings from -8dB to +7dB in 1.0dB steps.
3. Press the "PLAY/PAUSE/PWR ON-OFF" button
return to the EQUALIZER Mode.

Screen Saver

Sets a time delay for the screen to (1) go Blank, (2) display the Clock, (3) display the Song Title, (4)
display Image 1, or (5) display Image 2, if no buttons are being pressed e.g. After 5 Seconds of button
inactivity the screen will go blank.
1. In the SETTINGS Menu, press the "Next-Fast Forward" button
button to select the Screen Saver icon
button to enter the SCREEN SAVER Mode.
2. Press the "Next-Fast Forward" button
timer for the Screen Saver: Always Off – 30 Sec – 1 Min – 10 Min. Press the "PLAY/PAUSE/PWR
ON-OFF" button
3. After you select a Screen Saver timer delay you can setup the screen to go Blank, display the Clock,
or display the Song Title when the screen saver is activated.
4. Press the "Next-Fast Forward" button
the Blank, RTC, Song Title, Image 1, or Image 2 icon. Press the "PLAY/PAUSE/PWR ON-OFF"
button to select the type of Screen Saver and return to the SETTINGS Menu.
, or "Back-Fast Rewind" button
, or "Volume Down" button
, or "Back-Fast Rewind" button
to select the Screen Saver timer delay.
, then press the "PLAY/PAUSE/PWR ON-OFF"
to Increase, or Decrease the EQ
to save the new User EQ settings and
, then press the "PLAY/PAUSE/PWR ON-OFF"
, or "Back-Fast Rewind" button
22
, or "Back-Fast Rewind"
to switch
, or "Back-Fast Rewind"
to set the
to select