Download Print this page

Toro 31330 Installation Instructions

Glass windshield kit for groundsmaster 4300 or reelmaster 5010 series traction unit with rops extension kit

Advertisement

Quick Links

Glass Windshield Kit
Groundsmaster
with ROPS Extension Kit
Model No. 31330
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Thick flange bushing
Upper windshield
Lower windshield
Shoulder screw
Flange nut
Backup washer
Thin flange bushing
Installation
1. Move the machine to a level surface, shut off the engine, engage the parking brake, and remove the key from the
ignition switch.
2. Position the lower windshield and align the mounting holes
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
4300 or Reelmaster
Qty.
8
1
1
8
Install the kit.
8
8
8
Register at www.Toro.com.
®
5010 Series Traction Unit
(Figure
1).
Original Instructions (EN)
All Rights Reserved *3402-842* A
Printed in the USA
Form No. 3402-842 Rev A
Installation Instructions
Use

Advertisement

loading

Summary of Contents for Toro 31330

  • Page 1 Groundsmaster ® 4300 or Reelmaster ® 5010 Series Traction Unit with ROPS Extension Kit Model No. 31330 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
  • Page 2 Figure 1 1. Upper windshield 4. Backup washer 7. Flange nut 2. Lower windshield 5. Thin flange bushing 3. Shoulder screw 6. Thick flange bushing 3. Secure the lower windshield to the frame with the fasteners as shown in Figure 4.