Advertisement
Quick Links
Polycarbonate Windshield Kit
Groundsmaster
with ROPS Extension Kit
Model No. 31329
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Thick flange bushing
Upper windshield
Lower windshield
Shoulder screw
Flange nut
Backup washer
Thin flange bushing
Dual tab
Top mount tab
Side mount tab
Plastic rivet
Installation
1. Move the machine to a level surface, shut off the engine, engage the parking brake, and remove the key from the
ignition switch.
2. Position the lower windshield and align the mounting holes
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
4300 or Reelmaster
Qty.
13
1
1
13
13
13
Install the kit.
13
1
1
2
6
Register at www.Toro.com.
®
5010 Series Traction Unit
(Figure
1).
Original Instructions (EN)
All Rights Reserved *3402-828* A
Printed in the USA
Form No. 3402-828 Rev A
Installation Instructions
Use
Advertisement
Related Manuals for Toro 31329
Summary of Contents for Toro 31329
- Page 1 Groundsmaster ® 4300 or Reelmaster ® 5010 Series Traction Unit with ROPS Extension Kit Model No. 31329 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
- Page 2 Figure 1 1. Upper windshield 5. Lower windshield 9. Plastic rivet 2. Thin flange bushing 6. Thick flange bushing 10. Side mount tab (2) 3. Backup washer 7. Top mount tab 11. Dual tab 4. Shoulder screw 8. Flange nut 3.
- Page 3 Figure 2 Installing the top mount tab onto the frame 1. Thick flange bushing 4. Nut 2. Top mount tab 5. Frame 3. Plastic rivet (2) 8. Secure the bottom center of the upper windshield and the top center of the lower windshield with the dual tab and other hardware as shown in Figure...