Table of Contents
Advertisement
Multi-Projection Features
• The required time for configuring tiling automatically varies
depending on the layout and number of projectors. It takes up to
approximately 8 minutes.
a
• The required time for screen matching varies depending on the
layout and number of projectors. It takes up to approximately 18
minutes.
• If you have not installed the optional external camera or the Epson
Projector Professional Tool software is not available, select the
following settings from the Multi-Projection setting in the
projector's Extended menu:
• Tiling
• Edge Blending
• Screen Matching
• Brightness Settings
• Color Matching
• Black Level
• You can setup up to 9 projectors when using the projector's menu.
g g Related Links
• "Point Correction"
p.58
• "Brightness Settings"
p.60
• "Tiling"
p.96
• "Scale"
p.78
• "Edge Blending"
p.96
• "Screen Matching"
p.97
• "Color Matching"
p.98
• "Black Level"
p.97
Stacking
You can create one bright image by overlaying images from up to 6
projectors.
Start the Geometry Correction Assist - Stacking Function wizard in the
Epson Projector Professional Tool software.
Setting > Camera Assist > Geometry Correction Assist > Stacking >
s
Start
When the wizard has finished, if there are any gaps in the pixels of the
projected images, adjust the Point Correction setting manually.
• The required time to automatically configure stacking varies
depending on the layout and number of projectors. It takes up to
approximately 9 minutes.
a
• If the Epson Projector Professional Tool software is not available,
start automatic adjustment on the master projector using the
projector's menu. You can setup up to 2 projectors when using the
projector's menu.
s Extended > Multi-Projection > Simple Stacking > Start Auto
Adjustment
• If you have not installed the optional external camera, adjust the
following settings manually:
• Focus
• Zoom
• Lens Shift
• Geometry Correction
g g Related Links
• "Point Correction"
p.58
• "Lens Shift"
p.56
• "Zoom"
p.56
• "Focus"
p.58
• "Conditions for Simple Stacking"
• "Simple Stacking"
p.98
• "Geometry Correction"
p.79
Adjusting Colors
Display the test patterns from all projectors to check each color tone.
If you need adjust the color tone, perform the following operations:
• Adjust the Hue, Saturation, and Brightness settings for individual image
colors.
Image > Advanced > RGBCMY
s
p.99
120
Advertisement
Table of Contents
