Unpacking Your Appliance - Haier HLC1700AXW User Manual

UNPACKING YOUR APPLIANCE
Remove all packing materials, including the foam base and all adhesive tape holding
the washer accessories inside and outside.
NOTE. Small amounts of water may be found inside the packaging and inside the
washer. This is normal and is the result of water tests performed at the factory.
A WARNING
Suffocation Hazard
To avoid danger of suffocation, keep plastic bag and other packing materials
away from babies and children. Do not use this bag in cribs, carriages and
playpens. The plastic bag could block nose and mouth and prevent breathing.
This bag is not a toy.
REMOVE TRANSPORTATION BOLTS
NOTE. The transportation bolts must be removed before using the washing
machine. Four transportation bolts are installed by the factory to
prevent damage to the wash system that can occur from shock during
transportation.
Remove boits
on the rear side
and take out
plastic spacers
and rubber
grommets
from inner side
of the machine.
J 1
3. Replace back
cover by inserting
3
it in the two gaps
at the top of the
o\
opening and
\ replace the four
screws that hold
it in place.
J.
Fill shipping bolt
holes with plastic
hole plugs.
NOTE. Save all transportation parts for future use. All parts should be
reinstalled before transporting the washing machine.
9