Smartclean System - Philips Wet&Dry S7000 Series User Manual

40
English
Problem
Water is leaking from
the bottom of the
shaver.

SmartClean system

Problem
The SmartClean
system does not
work when I
press the on/off
button.
The shaver is not
entirely clean
after I clean it
with the
SmartClean
system.
Possible cause
During cleaning,
water may collect
between the inner
body and the outer
shell of the shaver.
Possible cause
The SmartClean
system is not
connected to the
wall socket.
The cleaning
cartridge is empty.
The replacement
symbol flashes to
indicate that you
have to replace the
cleaning cartridge.
You have not
placed the shaver in
SmartClean system
properly, so there is
no electrical
connection
between
SmartClean system
and the shaver.
Solution
This is normal and
not dangerous
because all
electronics are
enclosed in a sealed
power unit inside the
shaver.
Solution
Put the small plug in the
SmartClean system and put
the supply unit in the wall
socket.
Place a new cleaning
cartridge in the SmartClean
system.
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.