Table of Contents
Advertisement
Steps
1. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card of your computer.
CONNECTORS ON THE WIRELESS CARD
Main (white triangle)
Auxiliary (black triangle)
2. Slide and place the wireless-card bracket on the wireless card.
3. Align the notch on the wireless card with the tab on the wireless-card slot.
4. Slide the wireless card at an angle into the wireless-card slot.
5. Replace the screw (M2x3.5) to secure the wireless card to the system board.
Next steps
1. Install the
disk-drive
cage.
2. Install the
3.5-inch hard drive
3. Install the
2.5-inch hard drive
4. Install the
front
bezel.
5. Install the
side
cover.
6. Follow the procedure in
62
Removing and installing Customer Replaceable Units (CRUs)
if applicable.
if applicable.
After working inside your
ANTENNA-CABLE COLOR
White
Black
computer.
Advertisement
Table of Contents
