Lenovo ThinkSystem SD665-N V3 Manual page 167

4. Check Lenovo support site for an applicable service bulletin or UEFI firmware update that applies to
this Processor error.
5. If the problem persists, collect Service Data logs.
6. Contact Lenovo Support.
• FQXSFPU0004K: A discrepancy has been detected in the number of cores reported by one or more
processors within the system.
Severity: Error
User Action:
Complete the following steps:
1. If this is a newly installed option, ensure that matching Processors are installed in the correct
Processor sockets.
2. Check Lenovo support site for an applicable service bulletin that applies to this Processor error.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFPU0005K: A mismatch between the maximum allowed UPI link speed has been detected for
one or more processors.
Severity: Error
User Action:
Complete the following steps:
1. If this is a newly installed option, ensure that matching Processors are installed in the correct
Processor sockets.
2. Check Lenovo support site for an applicable service bulletin that applies to this Processor error.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFPU0006K: A power segment mismatch has been detected for one or more processors.
Severity: Error
User Action:
Complete the following steps:
1. If this is a newly installed option, ensure that matching Processors are installed in the correct
Processor sockets.
2. Check Lenovo support site for an applicable service bulletin that applies to this Processor error.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFPU0007K: Processors have mismatched Internal DDR Frequency
Severity: Error
User Action:
Complete the following steps:
1. Verify that matching DIMMs are installed in the correct population sequence. Correct any
configuration issues found.
2. If the problem persists, collect Service Data logs.
3. Contact Lenovo Support.
. 163
Chapter 3 UEFI events