Outline Of Operation Control By Mycrocomputer; Remote Control (Option Parts) - Mitsubishi Heavy Industries FDFL71KXE6F Technical Manual

1.10 OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER
9. OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER
1.10.1 Remote control

9.1 Remote control (Option parts)

(1) Wired remote control
(1) Wired remote control
Model RC-EX3A
Model RC-EX3A
Touch panel system, which is operated by tapping the LCD screen with a finger, is employed
for any operations other than the ①Run/Stop, ②F1 and ③F2 switches.
① Run/Stop switch
One push on the button starts operation and
another push stops operation.
② F1 switch③ F2 switch
This switch starts operation that is set in F1/F2
function change.
④ Operation lamp
This lamp lights in green(yellow-green) during
operation. It changes to red(orange) if any
error occurs.
Operation lamp luminance can be changed.
⑤ LCD (with backlight)
A tap on the LCD lights the backlight.
The backlight turns off automatically if there
is no operation for certain period of time.
Lighting period of the backlight lighting can be
changed.
⑤ LCD (with backlight)
③ F2 switch
④ Operation lamp
⑥ USB port (mini-B)
① Run/Stop switch
② F1 switch
If the backlight is ON setting, when the screen is
tapped while the backlight is turned off,the backlight
only is turned on.(Operations with switches ①,②
and ③are excluded.)
⑥ USB port
USB connector (mini-B) allows connecting to a
personal computer.
For operating methods, refer to the instruction
manual attached to the software for personal
computer (remote control utility software).
Note(1) When connecting to a personal computer, do not connect
simultaneously with other USB devices.
Please be sure to connect to the computer directly,without
going through a hub, etc.
44
- -
'16 • PAC-T-251
'20 • KX-T-348