(1. 3. 3) Changing Each Setting In; Pw Snr Mode - Toshiba IK-TF5C Instruction Manual

(1. 3. 3) Changing each setting in PW SNR mode
Move up down
By pushing
MENU UP, DOWN
-- SHUTTER --
MODE
E.TRG
TRG.P
PART
<MODE = E.TRG E.TRG = PW SNR>
(a) Changing the polarity of inputting trigger pulse setting
1 Set the "→" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.
2 Select either
(b) Changing the partial scanning setting
1 Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.
2 Select either OFF/120fps/180fps/E.120fps/E.180fps by pushing [DATA UP], [DATA DOWN] buttons.
Note:
The longer the storage time with extended exposures, the more visible certain characteristics of CCD
cameras become: fixed pattern noise, white pixels, etc.
16
Set by pushing
DATA UP, DOWN
E.TRG
PW SNR
OFF
, by pushing [DATA UP], [DATA DOWN] buttons.
• Sutter mode MANU, SS, E.TRG
• E.TRG mode
1P SNR, 1P SR, PW SNR, PW SR, RR
• Input trigger pulse setting at PW SNR and PW SR
Input trigger pulse : positive polarity
Input trigger pulse : negative polarity
• Partial scanning switch
OFF/120fps/180fps/E.120fps/E.180fps