Skoda Fabia III 2015 Workshop Manual page 27

– Insert screws -arrows- and tighten by hand.
– Raise assembly carrier until the assembly carrier touches the
body.
– Tighten screws -arrows- of power steering gear/assembly car‐
rier to specified tightening torque and remove attachment
(suspension) of the power steering gear.
Note
Note the following work steps and absolutely ensure that you
♦
follow the sequence.
Unscrew the fixing bolts from -T10096- and -T10486/1- one at
♦
a time. It should be subsequently replaced by a new bolt tight‐
ened to the recommended torque.
– Unscrew fixing bolt -1- from -T10486/1- the left, screw in new
bolt and tighten to the recommended tightening torque.
– Unscrew fixing bolt -1- of -T10486/1- from the right (shown in
figure), screw in new bolt and tighten to the recommended
tightening torque.
– Unscrew fixing bolt -2- of -T10096- from the left.
– Install left support.
– Screw in new bolts for the left support and tighten at the rear
by hand.
– Screw in new bolt for assembly carrier and left support and
tighten to the recommended tightening torque.
– Tighten the rear left support bolts to the recommended tight‐
ening torque.
– Unscrew right fixing bolts -2- of -T10096- (shown in figure).
– Attach right support.
– Screw in new bolts for the right support and tighten at the rear
by hand.
– Screw in new bolt for assembly carrier and right support and
tighten to the recommended tightening torque.
– Tighten up the rear right support bolts to the recommended
tightening torque.
– Remove engine/gearbox jack with adapter .
– Mount pendulum support on the gearbox and tighten new
screws -1- and -2-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
Note
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Position the screws -1- and -2- in the elongated holes of the pen‐
dulum support in such a way that there is maximum distance
between the gearbox and the assembly carrier.
Chassis, axles, steering - Edition 01.2015
Fabia III 2015 ➤
21