Chapter 1: Introduction; Welcome To Toshiba; Overview Of Steps For Installing, Setting Up, And Using Your New Tv - Toshiba 20DL77 Owner's Manual

Welcome to Toshiba

Thank you for purchasing this Toshiba TV, one of
the most innovative LCD TVs on the market.
The model and serial numbers are on the back of
your TV. Write these numbers in the space
provided on the front cover of this manual for
your records.
Instructions in this manual are based on using
the remote control. You can also use the controls
on the TV if they have the same name as those
on the remote control.
Please read all the safety and operating
instructions carefully, and keep the manual for
future reference.
Overview of steps for installing,
setting up, and using your new TV
Follow these steps to set up your TV and begin
using its many exciting features.
1
Carefully read the important safety,
installation, care, and service information
☞
( pages 2−6). Keep this manual for future
reference.
2
Observe the following when choosing a
location for the TV:
• Place the TV on the fl oor or a sturdy, level,
stable surface that can support the weight
of the unit. Secure the TV to a wall, pillar,
or other immovable structure (
• Place the TV in a location where light does
not refl ect on the screen.
• Place the TV far enough from walls and
other objects to allow proper ventilation.
Inadequate ventilation may cause
overheating, which will damage the TV.
THIS TYPE OF DAMAGE IS NOT
COVERED UNDER THE TOSHIBA
WARRANTY.
3
Do not plug in any power cords until AFTER
you have connected all cables and devices
to your TV.
4
BEFORE connecting cables or devices
to the TV, learn the functions of the TV's
connections and controls (
See "Learning about the remote control"
☞
( page 11) for an overview of the buttons
on the remote control.
8
20DL77_En_new23.indd 8 20DL77_En_new23.indd 8

Chapter 1: Introduction

5
6
7
8
9
10
11
12
13
☞
page 4).
☞
pages 9–10).
Install the batteries in the remote control
☞
( page 12).
Connect your other electronic device(s) to
☞
the TV ( pages 13–19).
AFTER connecting all cables and devices,
plug in the power cords for your TV and other
devices.
Press POWER on the TV control panel or
remote control to turn on the TV.
See "Menu layout and navigation" for a
quick overview of the TV's menu system
☞
( page 20).
Program channels into the TV's channel
☞
memory ( page 21).
For details on using the TV's features, see
Chapter 5.
For help, refer to the Troubleshooting section
☞
( Chapter 6).
For technical specifi cations and warranty
information, see Chapter 7.
Enjoy your new TV!
6/13/07 3:50:50 PM 6/13/07 3:50:50 PM