AEG L6TBN62K User Manual page 25

Regularly examine the drum to check for
limescale.
Regular detergents already contain water
softening agents, but we recommend to
run a cycle with an empty drum and a
descaling product occasionally.
Always follow the
instructions that you find on
the packaging of the
product.
13.5 Maintenance wash
With the low temperature programmes it
is possible that some detergent stays in
the drum. Perform a maintenance wash
regularly. To do this:
• Remove all laundry from the drum.
• Select the cotton programme with the
highest temperature with a small
quantity of detergent.
13.6 Cleaning the drum
Regularly examine the drum to prevent
unwanted deposits.
Rust deposits in the drum may occur due
to rusting foreign body in the washing or
tap water containing iron
Clean the drum with special products for
stainless steel.
Always follow the
instructions that you find on
the packaging of the
product.
Do not clean the drum with
acidic descaling products,
scouring products containing
chlorine or iron or steel wool.
13.8 Cleaning the detergent dispenser
1
For a thorough clean:
1. Remove all laundry from the drum.
2. Run a Katoen programme with the
highest temperature.
3. Add a small quantity of powder
detergent into the empty drum, in
order to rinse out any left residues.
13.7 Lid seal
Regularly examine the seal and remove
all objects from the inner part. Clean it
when needed, using ammonia cream
cleanser agent without scratching the
seal surface.
2
Occasionally, at the end of a
cycle the display may show
the icon : this is a
recommendation to perform
the "drum cleaning". Once
the drum cleaning has been
performed, the icon
disappears.
Always obey the instructions
that you find on the
packaging of the product.
3
ENGLISH 25