Standard Speed (P022 - P023) - Siemens 7MH7701-0AA00-0A Operating Instructions Manual

Parameter assignment
6.5 Slow speed
6.5.7.2

Standard speed (P022 - P023)

For relay output Q2
Probe B under speed setpoint (P022) for relay output Q2. Enter the frequency between pulses
in an under speed situation. Probe B over speed setpoint (P023) for relay output Q2. Enter the
frequency between pulses in an over speed situation. The setpoint value (Max Hz) for input I4
represents the 20 mA analog output AQ2. Only set the value if the non-contact tachometer
function will be used.
• P022: xxx Seconds
• P023: xxx Seconds
40
Operating Instructions, 11/2021, A5E45090709-AC
SITRANS WM300 MFA