Table of Contents
Advertisement
6.5
Slow speed
6.5.1
Slow speed (P005)
Note
Slow speed monitoring function, does not allow NCT or DSD functionality.
Enable for slow speed process monitoring. Disable for standard speed monitoring.
Functionality can be enabled from this screen. Pressing the F2 or Esc key and ▲ cursor key
together will enable or disable this feature set.
• P005: ENABLED or DISABLED
The setpoints are programmed in seconds and not frequency (Hz). When enabled, the
displays access only the slow speed version setup parameters. Slow speed version only allows
two independent sensors wired to inputs Q1 and Q2. Over speed and under speed setpoints
are programmed independently.
Note
Typically used for a slow speed process, but compatible with standard operating functions.
SITRANS WM300 MFA
Operating Instructions, 11/2021, A5E45090709-AC
Parameter assignment
6.5 Slow speed
33
Advertisement
Table of Contents
