6.5.3
Slow speed (P011)
For relay output Q1
Over speed setpoint indicates when the process speed of the target device has increased past
a safe working speed/rotation within the process. Enter the number of seconds between
pulses in an over speed situation.
• P011: xxx seconds
Values
SITRANS WM300 MFA
Operating Instructions, 11/2021, A5E45090709-AC
Setpoint 00:00:xx (HH:MM:SS)
range 0 ... 399s then resets back to 0
Input I3 – Over Speed alarm output relay Q1
Parameter assignment
6.5 Slow speed
35