Samsung AC TN4L Series Installation Manual page 34

Installation Procedure
3) SEG20
If you set the Individual control with remote control option to a value other than 0 to 4, it is automatically set to 0 (Indoor 1)
4) SEG21
Default value of Heating setting compensation is 5°C for 360 cassette model.
5) SEG23
Soft Off: The indoor unit turns off its operation at the indicated time in the table for Installation Option after its final
motion detection. But, it turns on again if the MDS detects motion.
Hard Off: Designated time after SOFT OFF, it cannot turn on automatically when it detects motion. Users should
control to turn on the indoor unit with remote control, etc.
6) SEG24
Inverter model (AC018/024TN4FCH, AC036/048TN4FC*, AC048TN4FCH/SU, AC***TN4L*C) : Cycle time of swing.
Fixed model (AC018/024TN4FCC) : Cycle time of swing & Snow accumulation prevention control.
Changing the addresses and options individually
When you want to change the value of a specific option, refer to the following table and follow the steps in Common
steps for setting the addresses and options on page 20.
Option SEG1
Function Page
Indication Details
Indication
and details
0
Example: Changing the Buzzer control (SEG17) option of the installation options to 1 disuse.
Option SEG1
Function Page
Indication 0
34
English
SEG2 SEG3
Option mode to
Mode
change
Indication Details Indication
Option
D
type
SEG2 SEG3
Option mode to
Mode
change
D 2
SEG4
Tens position of the
option number the option number
Details Indication Details Indication
Tens
0 to F position 0 to 9 position
value
SEG4
Tens position of the
option number the option number
1
SEG5 SEG6
Units position of
New value
Details Indication
Units
New
0 to 9
value
value
SEG5 SEG6
Units position of
New value
7 1
Details
0 to F