Samsung AC TN4L Series Installation Manual page 22

Installation Procedure
b Set the SEG5 value by rotating the Wheel clockwise
until the value you want to set appears on the remote
control display.
When you rotate the Wheel, values appear in the following order:
4 Press the (Mode) button. Dry and On appear on the remote control display.
5 Set the SEG6 and SEG8 values:
a Set the SEG6 value by rotating the Wheel
counterclockwise until the value you want to set
appears on the remote control display.
b Set the SEG8 value by rotating the Wheel clockwise
until the value you want to set appears on the remote
control display.
When you rotate the Wheel, values appear in the following order:
6 Press the (Mode) button. Fan and On appear on the remote control display.
7 Set the SEG9 and SEG10 values:
a Set the SEG9 value by rotating the Wheel
counterclockwise until the value you want to set
appears on the remote control display.
b Set the SEG10 value by rotating the Wheel clockwise
until the value you want to set appears on the remote
control display.
When you rotate the Wheel, values appear in the following order:
8 Press the (Mode) button. Heat and On appear on the remote control display.
22
English
Steps Remote control display
SEG5
SEG6
SEG8
SEG9
SEG10