Samsung AC TN4L Series Installation Manual page 17

CAUTION
Always remember to connect the air conditioner to the
grounding system before performing the electric connections.
Use a crimp ring terminal at the end of each wire.
The indoor unit is powered through the outdoor unit by
means of a H05 RN-F or H07 RN-F connection cable (or a
more power model), with insulation in synthetic rubber
and a jacket in polychloroprene (neoprene), in accordance
with the requirements specified in the standard EN
60335-2-40.
1 Remove the screw on the electrical component box
and remove the cover plate.
2 Route the connection cord through the side of the
indoor unit and connect the cable to the terminals
refer to the figure below.
3 Route the other end of the cable to the outdoor unit
through the ceiling & the hole on the wall.
4 Reassemble the electrical component box cover,
carefully tightening the screw.
Wiring terminals) 1 phase (AC018/024TN4*C*)
Indoor Unit
Outdoor Unit
1(L) 2(N) L
Cable clamp
Indoor power
N F1 F2
Cable
tie
Communication
Main power
cable
cable
Wiring terminals) 1 phase (AC036/048TN4*C*,
AC048TN4FCH/SU)
Indoor unit
Outdoor unit
1(L) 2(N)
Indoor power
Main power cable
Wiring terminals) 3 phase (AC048TN4FCC, AC048TN4FHH,
AC048TN4LHC)
Indoor unit
Outdoor unit
1(L) 2(N) L1(R) L2(S) L3(T)
Indoor power
Main power cable
F1 F2
L N
Communication
cable
F1 F2
N
Communication
cable
English
17