After-Cleaning Care - Bissell POWERCLEAN TURBOBRUSH PET XL Quick Start Manual

After-Cleaning Care

Visit support.BISSELL.ca for additional how-to videos on maintaining your machine.
1. 2.
Turn OFF and unplug the Remove the nozzle from the
machine. foot by lifting up on the back
of the Accessory Hose Door
to open.
4. 5.
Return the nozzle to the Rotate the nozzle down and
Foot of the machine. Line up click into place.
the two hooks on the nozzle
to the bottom of the foot.
Cleaning the Brush Roll
1. Turn OFF and unplug the 2. Lay the machine down on
machine. its back or side.
WARNING
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
3.
Hold the nozzle and insert
the Nozzle Clean Out Tool into
the thin slot at the front of
the nozzle where it touches
the floor. Clean out pet hair or
debris.
6.
Close the Accessory Hose
Door.
3. Use the comb to remove
debris or hair from the brush
rolls.
CONTINUED ON NEXT PAGE
BISSELL.ca 9