Gree SUPER+ MULTI ULTRA Series Service Manual page 40

Super Free Match
Service Manual
Auto, Cool, Dry Fan, Heat modes can be selected circularly by pressing this button. Auto mode is the default
after power on. Under Auto mode, the temperature will not be displayed. Under Heat mode, the initial value is
28℃(82℉); Under other modes, the initial value is 25℃(77℉).
6) I FEEL
This function can be activated by pressing this button and canceled by another press. When this function is
on, the I FEEL information will be sent out in 200ms after each operation on the controller and the remote
controller will send the temperature information to the main controller every 10 minutes.
7) HEALTH (
This function can be activated or deactivated by pressing this button. After the unit is turned on, the default is
HEALTH ON.
8) AIR (
AIR ON or Air OFF can be selected by pressing this button.
9) CLOCK
The clock can be set up by pressing this button, with the symbol displayed and blinking. In such a case,
pressing ＋ or － within 5 seconds can adjust the value. If the button is pressed down for more than 2 seconds,
the value on ten's place will increase by 1 in every 0.5 seconds. After that, repressing this button and then symbol
stops blinking, which indicates the setting is made successfully. After powered on, the default value is 12:00
with displayed. Once the symbol
Timer value.
10) TIMER ON
"ON" will be displayed and blink for 5 seconds by pressing this button, and soon adjust the time by pressing
＋ or － within 5 seconds. Each press will make the time increased or decreased by 1 minute. If the button is
pressed down for more than 2 seconds, the time will be changed quickly in such a way: firstly the value on the
one's place is changed and then is the value on the ten's place. Once Timer ON has been set already, it can be
canceled by repressing it. Before the setting, please adjust the CLOCK to the current actual time.
11) SWING UP/DOWN (
The swing angle which circularly changes as below can be selected by pressing this button:
This kind of remoter controller is universal. And the three swing statuses of
CONTROL 34
)
)
is displayed, the current time is the Clock value; otherwise it is the
)
are the same as that