Gree SUPER+ MULTI ULTRA Series Service Manual page 149

4.Disconnect the left
side plate and rear side
plate
6.1.2 Assembly and Disassembly of the Compressor
Remarks: Prior to the assembly of the compressor, make sure there is no refrigerant in the pipeline and the power
supply is cut off.
S e t s p
1.Remove the
power code of the
compressor
2.Remove the
connecting pipe
of the compressor
l I u l r t s t a o i s n
Super Free Match
Service Manual
a) Unscrew the fixed screws of
left side plate and rear side
plate;
b)
Remove left side plate and rear
side plate.
O p r e i t a n o n I t s u r
a) Unscrew the fixed
screws of power
code;
b) Remove the power
code.
Note: when removing the
power cord, please label
the power cord and the
terminals to avoid
misconnecting next time.
a) Solder the joint of ·
connecting pipe of
the compressor.
b) Pull out the
connecting pipe
Note: never let the flame
contact any other
component.
143
N
t c o i s n
MAINTENANCE