Table of Contents
Advertisement
1. Remove rain funnel (open locking tabs on both sides and pull off funnel)
2. Gently remove debris or insects inside the rain sensor.
3. Clear debris from drain vents.
4. Clear debris from the rain funnel.
5. Reinstall the rain funnel.
Note: Do not oil the rain sensor.
WHY ARE PARTS OF LETTERS OR NUMBER MISSING?
•
This is generally a power related issue.
•
Batteries
may be overpowered or underpowered. Remove batteries from Rain station.
•
Press any button 20 times. Leave the Rain station unpowered for 1-2 hours.
•
Install fresh alkaline batteries with correct polarity.
WHY IS MY NEW RAIN STATION UNREADABLE?
•
On a brand new rain station, check for thin plastic films of printed scratch guard that may be
on the screen. This thin piece of plastic has printed numbers for store displays.
•
With all power removed the rain station should be blank.
•
If numbers still appear, please check for scratch guard.
•
Check that the batteries polarity is correct.
•
This is generally a power related issue.
•
Batteries
may be overpowered or underpowered. Remove batteries from Rain station.
•
Press any button 20 times. Leave the batteries out of the display for 2 hours.
HOW CAN I CLEAN THE RAIN SENSOR?
10 |
P a g e
Advertisement
Table of Contents
