KTM 250 XC-F 2012 Setup Instructions page 5

SETUP
Unpacking and setting up the vehicle
2.1
Packaging 2
–
Remove the box and the plastic packaging.
Info
To avoid damaging the motorcycle during the setup, leave the protective
film on the vehicle until you have finished.
–
Remove the separate enclosure and unpack it. Check that the scope of delivery
is complete on the basis of the enclosed packing list.
–
Have a lift stand available.
601701-01
Lift stand (54829055000)
–
Carefully loosen and remove the footrest mount.
Info
An assistant prevents the motorcycle from falling over.
–
Together with an assistant, take the vehicle off the palette.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
101010-01
Package 12
–
Remove the box and the plastic packaging.
Info
An assistant prevents the motorcycle from falling over.
To avoid damaging the motorcycle during the setup, leave the protective
film on the vehicle until you have finished.
–
Remove the separate enclosure and unpack it. Check that the scope of delivery
is complete on the basis of the enclosed packing list.
101012-01
–
Have a lift stand available.
Lift stand (54829055000)
–
Together with an assistant, take the vehicle off the palette.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
101013-01
–
Remove the cardboard from around the shock absorber.
–
Position the angle lever and linkage lever.
–
Mount and tighten screw cap
Guideline
Nut, frame to linkage
lever
–
Mount and tighten screw
Guideline
101014-10
Screw, bottom shock
absorber
.
1
M14x1.5 80 Nm
(59 lbf ft)
.
2
M10 60 Nm
(44.3 lbf ft)
3
Loctite ® 2701
Loctite 2701
®