Samsung AM AN4PKH Series Installation Manual page 22

Installation Procedure
6 Press the (Mode) button. Fan and On appear on the remote control display.
7 Set the SEG9 and SEG10 values:
a Set the SEG9 value by pressing the
value you want to set appears on the remote control display.
b Set the SEG10 value by pressing the
value you want to set appears on the remote control display.
When you press the
following order:
8 Press the (Mode) button. Heat and On appear on the remote control display.
9 Set the SEG11 and SEG12 values:
a Set the SEG11 value by pressing the
value you want to set appears on the remote control display.
b Set the SEG12 value by pressing the
value you want to set appears on the remote control display.
When you press the
following order:
10 Press the (Mode) button. Auto and Off appear on the remote control display.
22
English
Steps
(Low Fan) button repeatedly until the
(High Fan) button repeatedly until the
(Low Fan) or (High Fan) button, values appear in the
(Low Fan) button repeatedly until the
(High Fan) button repeatedly until the
(Low Fan) or (High Fan) button, values appear in the
Remote control display
SEG9
SEG10
SEG11
SEG12