Schwinn IC2i Assembly Manual / Owner's Manual page 17

START/RESET Push to start, or to stop an active workout and reset the Time to 0:00.
LCD Display Data
The console display shows each workout measurement in sequence for 5 seconds:
RPM
The RPM display field shows the machine revolutions per minute (RPM). The maximum display is 200.
CAL
The CAL display field shows the estimated calories that you have burned during the exercise. The maximum display is
9999. If the calorie count is more, the display flashes 9999.
Time
The TIME display field shows the time count in the workout. The maximum display is 99:59. If the time count is more, the
display starts again at 0:00.
Distance
The DISTANCE display field shows the distance count (miles or km) in the workout, to two decimal places—for example,
1.50. The maximum display is 99.99. If the distance is more, the display starts again at 0.00.
Note: T o change the measurement units to English Imperial or metric, refer to the "Service Mode" section in this manu-
al.
Speed
The SPEED display field shows the machine speed in kilometers per hour (km/h) or miles per hour (mph), to one decimal
place—for example, 10.5 or 0.0. The maximum display is 99.9.
Pedal revolutions Calories
Distance
Time
Numeric
display
Speed
17