Table of Contents
Advertisement
8
Medalist 17242, 13032, 10232, 8422 and 4312, Rev. A
Interface
connector
Figure 4. Cable connectors
Caution. To avoid possible damage to the drive, do not
!
overtighten the screws and do not use metric screws.
Note. If you are mounting the drive in a 5.25-inch drive bay, you
need a mounting adapter or frame kit. Contact your com-
puter dealer. Some computers also require drive mount-
ing rails, which can be obtained from your distributor or
computer manufacturer.
5. Attach a power cable to each drive. If your computer does not
have an unused power connector, you can purchase a Y-
shaped power cable from your computer dealer.
6. Check all cable connections and then replace your computer
cover. Continue to "Configuring Your Computer."
Power
connector
Pin 1
Advertisement
Table of Contents
