Technical Data Table; Intended Use; Definition Of The Type Of User; Improper Use - Stiga Villa Spring Instruction Manual

(Translation of the Original Instructions)
2 .3

INTENDED USE

This machine has been designed and built to mow
grass.
The use of special accessories, envisaged by the
Manufacturer as original equipment or purchasa-
ble separately, allows the user to perform this work
in accordance with different operating modes as
illustrated in this manual or the instructions accom-
panying the individual accessories.
Likewise, the possibility to apply supplementary
equipment (if envisaged by the Manufacturer)
may extend the range of intended uses to other
functions, in accordance with the limits and condi-
tions indicated in the instructions accompanying
the equipment in question.
The machine must be used by one ope-
rator .
The stability of the machine is reduced
when a front accessory other than the
cutting device assy is used .
The machine must be used with at least
the cutting device assy or another front
accessory installed .

2 .3 .1 DEFINITION OF THE TYPE OF USER

This machine is designed for use by the general
public, i.e. non-professional operators.
This machine is intended for "hobby use".
2 .4

IMPROPER USE

Any other use, different to the uses cited above,
may be dangerous and cause injury and/or mate-
rial damage.
Improper uses (by way of example and not limited
to) are:
• Carrying other people, children or animals on
the machine or on a trailer.
• Towing or pushing loads without using the
proper towing accessory.
• Using the machine to travel over unstable,
slippery, frozen, pebbly or potholed terrain or
puddles or marshes which do not allow the user
to accurately assess the solidity of the ground.
• activation of the cutting devices on grass-free
areas.
Improper use will render the warran-
ty null and void and the Manufacturer
shall be exonerated from all liability,
with all responsibility for damages or
injuries to self or third parties being
transferred to the user .
ENGLISH
2 .5

SAFETY SIGNS

Safety signs on the machine are designed to
inform the user as to the correct conduct to be
maintained when using the machine, in particular
for operations which require special caution and
attention.
WARNING! Indicates a hazard . It is
usually accompanied by other symbols
indicating the type of hazard .
Warning! Read the instruction manual
before using the machine.
Warning! Watch out for any loose objects
on the ground. Pay attention to any other
people who may be in the area.
Warning! Always wear hearing protectors.
Warning! The machine has not been
approved for use on public roads.

2 .5 .1 Decals (4)

Indicates parking brake blocking.
The decal is located:
• near the transmission engage/release lever.
max xxx N (xxkg)
The decal is located:
• near the tow bar.
Warning! The machine, equipped
with original accessories, must not
be driven in any direction on slopes
with a gradient greater than 10º.
Tyre pressure. The decal shows the
optimum tyre pressure values - see
cap. "0 TECHNICAL DATA TABLE".
Correct tyre pressure is an essential
condition for achieving the best per-
formance from your machine.
Indicates transmission engaging /
release (5:A).
Indication of the maximum towable
weight (4:B).
Warning! Burns hazard (4:C). Do not
touch the silencer.
The decal is located:
EN
5