Spoke_Branch_A - ZyXEL Communications ZyWALL ATP Series Handbook

www.zyxel.com

Spoke_Branch_A

Go to CONFIGURATION > VPN > IPSec VPN > VPN Gateway, select Enable. Type
the VPN Gateway Name used to identify this VPN gateway.
Then, configure the Primary Gateway IP as the Hub_HQ's wan1 IP address (in the
example, 172.16.10.1) and Secondary Gateway IP as the Hub_HQ's wan2 IP
address (in the example, 172.100.110.1). Select Fall back to Primary Peer Gateway
when possible and set desired Fall Back Check Interval time.
Type a secure Pre-Shared Key (8-32 characters) which must match your Hub_HQ's
Pre-Shared Key and click OK.
CONFIGURATION > VPN > IPSec VPN > VPN Gateway
150/782