Honda CRF1100AL 2019 Owner's Manual page 319

Raise the front wheel off the ground
13.
again, and check that the wheel rotates
freely after you release the brake.
14.
FO, II FO type
Install the front axle nut cap.
Remove the protective tape or cloth.
15.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
#
Rear Wheel
Removal
Support your vehicle securely and raise
1.
the rear wheel off the ground using a
maintenance stand or a hoist.
2.
CRF1100DL/DL2/DL4
Release the parking brake.
3.
Tape or cloth
P. 130
2
Tyre Puncture
CRF1100AL/AL2/AL4
Cover both sides of the rear wheel, spoke
and brake caliper with protective tape or
cloth.
CRF1100DL/DL2/DL4
Cover both sides of the rear wheel, spoke
and rear brake and parking brake calipers
with protective tape or cloth.
Removing Wheels
u
Continued 315