Honda CRF1100AL 2019 Owner's Manual page 269

Rubber seal
Apply a thin coat of engine oil to the
8.
rubber seal of a new oil filter.
Install the new oil filter and tighten.
9.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft)
Install new sealing washers onto the drain
10.
bolts. Tighten the drain bolts.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft)
Oil filter
Engine Oil Changing Engine Oil & Filter
u
Fill the crankcase with the recommended
11.
oil ( P. 243, P. 361) and install the oil fill
2 2
cap.
Required oil
When changing oil & engine oil
filter:
CRF1100AL/AL2/AL4
4.0 L (4.2 US qt, 3.5 Imp qt)
CRF1100DL/DL2/DL4
4.2 L (4.4 US qt, 3.7 Imp qt)
When changing oil only:
CRF1100AL/AL2/AL4
3.9 L (4.1 US qt, 3.4 Imp qt)
CRF1100DL/DL2/DL4
4.0 L (4.2 US qt, 3.5 Imp qt)
Check the oil level.
12.
Check that there are no oil leaks.
13.
Install the skid plate.
14.
P. 262
2
P. 259
2
265