Honda CRF1100AL 2019 Owner's Manual page 29

Gear position indicator
CRF1100AL/AL2/AL4
The gear position is shown in the gear position indicator.
"-" appears when the transmission is not shifted properly.
u
CRF1100DL/DL2/DL4
The gear position is shown in the gear position indicator when the MT MODE is selected.
The indicator may flash if:
The front wheel leaves the ground.
u
You turn the wheel while the vehicle is upright on the stand.
u
This is normal. To operate the system again, turn the ignition switch to the
position, and then to the (On) position again.
D is shown in the gear position indicator when the D mode is selected in the AT MODE.
S is shown in the gear position indicator when the S mode is selected in the AT MODE.
If the "-" indicator is blinking in the gear position window while riding:
S mode level indicator
CRF1100DL/DL2/DL4
(P.211)
(Off)
(P.306)
Continued
25