Table of Contents
Advertisement
Water plus
You can determine the amount of
water used if the Water + Extra is
selected.
Options
= More water is used in the wash
and rinse stages (factory
default setting)
= An extra rinse is carried out
= The water level in the wash
and rinse stages is increased
and an extra rinse is carried
out
Water plus level
There are three different water levels
which can be selected by activating
the Water + Extra.
Options
= No higher water level (factory
default setting)
= Water level increased by 1 level
when washing and rinsing
= Water level increased by
2 levels when washing and
rinsing
= Water level increased by
3 levels when washing and
rinsing
Programmable functions
Maximum rinse level
The water level in the rinse can be
permanently set to the highest value.
This function is important for allergy
sufferers as it achieves excellent rinse
results. The water consumption will be
increased.
Options
= Maximum rinse level is
switched off (factory default
setting)
= Maximum rinse level is
switched on
Suds cooling
When this is activated, additional
water flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a
Cottons programme with a temperature
of 70°C or higher is selected.
Suds cooling should be activated:
- to prevent the danger of scalding if
the drain hose is hooked over the
edge of a laundry tub or trough.
- where the drainage pipes are rated
less than 70°C.
Options
= Suds cooling is switched off
(factory default setting)
= Suds cooling is switched on
79
Advertisement
Table of Contents
