Table of Contents
Advertisement
Installation
The Miele water protection
system
The Miele water protection system
protects all parts of the washing
machine and surrounds from water
damage.
The system consists of three main
components:
- the inlet hose
- the electronic unit and drainage and
overflow protection
- the drain hose
Inlet hose
- Protection against bursting
The inlet hose is tested to withstand
pressures up to 7000 kPa.
Electronic unit and machine housing
- Sump: any leaking water from the
washing machine is collected in the
floor tray. There is a float switch to
close the water intake valve. The
water inlet is shut off and any water
inside the suds container is drained
away.
- Leak protection: any leaking water
that is not collected in the sump is
detected. The water inlet is shut off
and any water inside the suds
container is drained away.
- Overflow protection: this prevents the
washing machine from taking in too
much water and overflowing. If the
water level exceeds a certain level,
the drain pump switches on and
pumps the excess water away in a
controlled way.
68
Drain hose
The drain hose is protected by a
ventilation system which prevents the
washing machine from being emptied
completely.
Advertisement
Table of Contents
