Table of Contents
Advertisement
g Time display
After the programme has started, the
programme duration will appear in
the display in hours and minutes.
When Delay start is being used, the
programme duration will appear after
the Delay start time has elapsed.
h sensor controls
The Delay start time selected will
appear in the time display.
After the programme has started, the
Delay start time will begin to count
down.
Once the Delay start time has
elapsed, the programme begins and
the estimated programme duration
appears in the time display.
After touching the sensor, a
later start time for the
programme (Delay start) can be
selected. Once selected,
lights up brightly.
The duration of the Delay start
period is increased by touching
the sensor.
The duration of the Delay start
period is reduced by touching
the sensor.
Operating the washing machine
i Start/Add laundry sensor
The programme can be started
as soon as the sensor is
flashing on and off. Touching
the Start/Add laundry sensor
starts the selected programme.
The sensor lights up
constantly.
Once the programme has been
started, the Start/Add laundry
sensor allows you to add
laundry.
j Optical interface
For service technicians.
k Programme selector
For selecting programmes and for
switching off the appliance. The
washing machine is switched on by
selecting a programme, and
switched off by turning the
programme selector to the
position.
How the control panel works
The , , , , and sensors
react to fingertip contact. Selection is
possible as long as the respective
sensor is illuminated.
If a sensor is brightly lit, this means:
currently selected
If a sensor is dimly lit, this means:
selection possible
15
Advertisement
Table of Contents
