Table of Contents
Advertisement
Programme chart
Outerwear
Items
Performance outerwear (e.g. jackets and trousers) made from
membrane fabric such as Gore-Tex®, SYMPATEX®,
WINDSTOPPER®, etc.
Notes
- Close any zips and Velcro fasteners before washing.
- Do not use fabric softener.
- If required, these items can also be reproofed using the
Proofing programme. Reproofing after each wash cycle is not
recommended.
Proofing
Items
Treating microfibre fabric, ski wear or table linen made from mainly
synthetic fibres to provide a finish that is resistant to water and dirt.
Notes
- The items should be freshly laundered and spun or dried before
proofing.
- For best results, the items should be heat-treated afterwards. This
can be achieved by drying them in the tumble dryer or by ironing
them.
Drain/Spin
Notes
- Drain only: Set spin speed to .
- Make sure you select the appropriate spin speed.
36
Cold to 40°C
40°C
Max. load 2.5 kg
Max. load 2.5 kg
–
Advertisement
Table of Contents
