Table of Contents
Advertisement
6.9
Drive system
The BMG 2200RC is driven by 2 Heinzmann High Torque Wheel Hub Drives.
It has two electronic controllers that are operated with the joystick and buttons from the control or remote
panel.
The motors are equipped with a holding brake and manual release so that the wheels can rotate freely without
the brake. The rims are directly installed to the motor.
To operate the manual release
Make sure that the wheels have wheel blocks in front and back of them before the manual release. The wheels
can roll freely when you start the manual release.
Release the wheels manually on ramp only if there is no possibility to move it when machine works. Make sure
that there are no persons or obstacles on the route you are going to move the machine to. It can cause serious
injury or dead.
44
21.07.2023
Advertisement
Table of Contents
