Advertisement
Connecting your Front Speakers:
The passive speakers all use an input terminal cup type of connection as shown in Figure 1 below.
Figure 1: Speaker Terminal Connection
Note: it is recommended that you turn your receiver and or amplifier volume down to a minimum that you
plan to use to power your speakers and then power off the receiver and or amplifier before attempting to
connect speaker wires to your receiver and or amplifier.
Connect your Left and Right front speakers first with speaker wires to the terminal connections as shown in
Figure 1 above.
Connect the other end of the speaker wire to your receiver / amplifier power output connections, please see
Figure 2, example shown below.
Figure 2: Receiver High Level Output to Front Speakers
Note: when plugging up each speaker, be sure to connect the (-) speaker terminal to the receiver / amplifier
(-) terminal that you will be using as your sound source.
Connect the (+) speaker to (+) between the speaker to the receiver / amplifier (+) terminal that you will be
using as your sound source.
Failure to connect properly may result in an out of speaker phase condition that may result in a diminished
overall sound.
4
Advertisement
