Yamaha YZF R1 2021 Owner's Manual page 38

Instrument and control functions
Triangle mark -
screens have an upward pointing trian-
gle mark item. Select the triangle mark
to save setting changes made and exit
that screen.
TIP
 Should vehicle motion be detect-
ed, the screen will automatically
exit MENU and change to the
5
main screen.
 To ensure that the desired setting
changes are saved, be sure to exit
via the triangle mark. Simply per-
forming a long push and exiting
the MENU screen entirely may not
save setting changes.
"Display Mode"
There are two main screen display
modes, STREET MODE and TRACK
MODE.
To set the main screen display mode
1. From the MENU screen, select
"Display Mode".
certain setting
MPH
2. Select
"TRACK MODE" (or select the tri-
angle mark to exit).
MPH
3. Long push the wheel switch to exit
the MENU screen or use the wheel
switch to select another module.
10 : 00
MENU GPS
Display Mode
YRC Setting
Lap Time
Logging
Maintenance
Unit
"STREET MODE" or
10 : 00
Display Mode
STREET MODE
TRACK MODE
5-14
"YRC Setting"
This module allows you to customize
the four YRC modes MODE-A, MODE-
B, MODE-C, and MODE-D by adjust-
ing the setting levels (or on/off status
as applicable) of YRC items PWR,
TCS, SCS, LCS, QSS, LIF, EBM, and
BC. For YZF-R1M, you can select the
ERS mode to be associated with each
YRC mode, and also adjust the setting
levels of the ERS modes.
TIP
 The traction control system has 9
setting levels and ERS has 6
modes.
 Whenever there are more selec-
tions (setting levels or modes)
available than can be shown on
the screen at one time, a scroll bar
will appear to notify you that addi-
tional selections are available by
scrolling.
PWR
Select PWR-1 for the most aggressive
throttle response, PWR-2 and PWR-3
for smoother throttle grip/engine re-